Micro-inverters, DC optimisers, gateway, rapid-shutdown devices and flexible photovoltaic kits. Select the architecture and catalogue edition for your project.
Gerenderte Darstellung – kein Foto des tatsächlichen Produkts
04 / PRODUKTFAMILIEN
Einblick in die Produktlinie AetherSol™.
Representative Archai family image. The pictured nameplate may carry an earlier model reference; use the selected model data and confirm the delivered rating plate.
ASM-2026
Grid-connected micro-inverters
Single-, dual- and four-input micro-inverters. Compare AC output in VA, per-input DC ratings and the applicable hardware revision.
Representative Archai family image. The pictured nameplate may carry an earlier model reference; use the selected model data and confirm the delivered rating plate.
ASPM-2026
Panel micro-inverters
ASPM500, ASPM550 and ASPM600 low-profile micro-inverters for factory AC-module integration.
Representative Archai family image. The pictured nameplate may carry an earlier model reference; use the selected model data and confirm the delivered rating plate.
ARC-2026
DC optimisers, gateway and SolarSync
ARC-800 module-level DC optimisation with ARC-GT and the compatible SolarSync monitoring workflow.
Representative Archai family image. The pictured nameplate may carry an earlier model reference; use the selected model data and confirm the delivered rating plate.
ASR-2026
Module-level rapid shutdown
ASR-15S serves one PV module; ASR-15D serves two. Both use the compatible HPLC shutdown and monitoring system.
Representative Archai family image. The pictured nameplate may carry an earlier model reference; use the selected model data and confirm the delivered rating plate.
FSK-2026
Flexible photovoltaic kits
FSK-400 and FSK-800 component sets with flexible PV modules, micro-inverter, prepared cables and mounting straps.
Fragen Sie Archai nach produktspezifischen Spezifikationen und verfügbaren Konfigurationen.
Wählen Sie die Umwandlungs- und Steuerungsarchitektur.
2026 product catalogue · 19 models. Select the catalogue edition and supplied hardware revision when requesting technical information.
Module-level AC conversion
ASM and ASPM micro-inverters convert PV module DC to grid-connected AC. Their specified monitoring path uses 2.4 GHz Wi-Fi. The number of PV inputs and the number of independent MPPT channels are separate characteristics.
DC optimisation with a string inverter
ARC-800 optimisers retain the DC string architecture. ARC-GT gathers compatible optimiser data by PLC and connects to the host over Wi-Fi or RS-485. SolarSync content here applies to this optimiser/gateway ecosystem.
Module-level rapid shutdown
ASR-15S and ASR-15D provide shutdown and monitoring in the compatible HPLC system. They are not micro-inverters or per-module MPPT optimisers. System matching and applicable installation instructions remain essential.
SolarSync · Überwachung des Optimierersystems
SolarSync provides a layout-oriented view of compatible optimisers and their operating information. The official Archai iOPT / GT operating source describes the layout, discovery and status workflows below. Confirm the supplied hardware and software revision before commissioning.
Interface illustration from the official Archai Power source. It does not represent a live customer installation or establish the current software release.
Prepare the layout
Record each optimiser serial number against its physical module position.
In Layout, select Add and enter the identifier and row/column information. Save the layout.
Arrange the module positions and save changes; use the recorded serial-number map to check correspondence.
Read system information
Use the layout to inspect the operating information shown for the selected optimiser.
The source describes green for normal operation, grey for offline and red for a fault. Confirm the legend for the installed software revision.
For an offline entry, check its recorded serial number and follow the applicable discovery procedure. Refer unresolved faults to technical support.
This workflow is specific to the compatible optimiser/gateway system. The separate monitoring-system guide referenced by the supplied ASM/ASPM manuals is required for those products; SolarSync compatibility must not be assumed.
Technische Unterlagen und Systemauswahl
Request the English document for the selected model and catalogue edition. Installation and operating instructions must match the supplied hardware, connectors and destination-market requirements. User manuals are supplied through the website application process.
These compatibility pages retain earlier product information and document status. A matching model name does not establish the same hardware revision or ratings. For new projects, start with the current range and confirm the supplied configuration with Archai.