AetherNexus K-DCU — technical drawing of the outdoor enclosure

Technical drawing derived from the supplied 3D enclosure model, in millimetres — not a photograph. The model shows the front door open, so the door is not drawn; hinges, lock hardware and the rear pole brackets are included.

K-DCUDATA CONCENTRATOR UNIT

Low-voltage AMI Data Concentrator Unit

The AetherNexus K-DCU is a modular data concentrator unit for KEPCO's low-voltage AMI, installed at the secondary side of pole-mounted or pad-mounted distribution transformers. Function units plug into a slot-type shelf in an aluminium outdoor enclosure: a power supply unit (PSU), a main system unit with an L2 switch (MSU), a communication unit and an optional transformer load-monitoring unit (EMU). The values on this page are requirements of the KEPCO purchase specification that the product is designed to.

DCUKEPCO AMIIP-PLC · IP-wirelessPole mounting
SPECIFICATIONS
Product typeLow-voltage AMI data concentrator unit
ConfigurationsK-DCU(1): IP-PLC + IP-wireless unit · K-DCU(2): IP-PLC unit
Function unitsPSU, MSU and communication unit; EMU optional
Power supplyAC 220 V, three-phase; keeps operating on any single phase
Network portsLAN 10/100BASE-T, 4 or more · WAN 10/100BASE-T, 2 or more
SecurityFirewall, port-based VLAN and a crypto module to KCMVP requirements
IP-wireless917 MHz to 923.5 MHz · IEEE 802.15.4-2015 · AES-128 or ARIA-128
EnclosureAluminium · IP-56 specification requirement · key lock; opening is reported to the server
MountingPole, with arm-tie bands at an upper and a lower bracket
Dimensions from the 3D model234.5 × 410.0 mm (W × H) · depth 254.5 mm including the rear pole brackets
INQUIRE ABOUT THIS PRODUCT ↗REQUEST DATASHEET ↗← BACK TO NX-DCU

Source: KEPCO K-DCU purchase specification (August 2023 edition) and the supplied enclosure 3D model. The values are specification requirements, not test, certification or type-approval results. The English datasheet, catalogue and user manual are available on request.